Role: {{ value }} Which best describes your role?

Your response helps us make our online experience better to provide content that is specific to your role.

Thank you. Your response helps us make our online experience better to provide content that is specific to your role.

A VAPOR CONTROL MEMBRANE YOU CAN RELY ON

In recent years, there is a clear trend to have more energy-efficient buildings, which is also driven by building regulations. The roof is a large part of the building envelope and therefore has a significant impact on the flow of energy in and out of buildings. Vapor control membranes play a very important role in this.

The V-Gard vapor control membrane is designed to be used as a vapor control layer in our roofing systems. It consists of reinforced aluminium foil with self-adhesive bituminous backing, protected by a release film. The fiberglass reinforcement provides high strength to the membrane, which guarantees excellent mechanical performance.

V-Gard is available in standard and FR grade. Rolls are 1.08 m wide by 25 or 50 m long. 

FEATURES AND BENEFITS

Excellent vapor resistance

V-Gard provides an excellent vapor barrier, with a vapor resistance value expressed by an Sd (equivalent air layer thickness) of >1,500 m. It is therefore suitable for most roofs.

 

Resistant to foot traffic

The engineered composition of V-Gard provides high resistance to static loading and dynamic impact. Its strong physical properties make it suitable for direct application onto metal decks, limiting the risk of tears caused by foot traffic.

 

Cold installation - safe and easy to install

The installation of V-Gard is part of a single-ply concept: it is a 100% cold and user-friendly process that does not require open flame. V-Gard can be adhered using primer to most substrates such as concrete, plywood, OSB and metal decks. The use of primer is not required on metal decks, unless otherwise specified by local regulations. V-Gard's 1.08 m width allows for the seam overlap to be located on the top flute of most metal decks. This allows an easy application, including effective rolling. The release liner can be removed easily and installation can be done by a two-men crew.

 

Preprinted overlap marking

The overlap marking printed on both sides of the V-Gard membrane further facilitates installation.

 

Efficient air barrier

V-Gard can be adhered to almost any substrate, even brick walls, minimizing air leaks and contributing to the overall energy efficiency of the building.

 

Excellent substrate for attaching insulation with PU adhesive

The treated surface of V-Gard is ideal for the adhesion of insulation boards when mechanical fastening to the deck is not an option.

 

Outstanding adhesion

V-Gard achieves excellent wind uplift performance on different roof substrates.

 

One-source supplier

The use of V-Gard ensures a compatible design and high quality performance where all roofing components are supplied and warranted by one manufacturer.

 

Minimal packaging

Each roll of V-Gard comes in a belly band wrap, which minimizes waste. V-Gard is available in standard and FR grade. Contact us for the complete list of approved substrates or for additional technical information.