From adhesives to sealants: we offer you a complete range of accessories to achieve the perfect EPDM roofing installation. That way you can enjoy the convenience of having all components for a total EPDM roofing system from a single source, another guarantee for the highest quality.
Discover our range of accessories:
Discover our range of EPDM field-seaming products. They are easy to use and deliver long-term performance.
Designed to clean and prepare the RubberGard EPDM membrane and/or substrates that are to receive a QuickSeam product, Pourable Sealer and/or Lap Sealant.
Designed for field splicing RubberGard EPDM membrane panels.
Strip of RubberGard MAX Reinforced EPDM membrane with QuickSeam tape factory-laminated to it along one edge. It is used for non-penetrating base tie-ins, as described in the Elevate guidelines.
Strip of Elevate RubberGard EPDM MAX reinforced membrane with two QuickSeam tape strips factory-laminated to it along its length. It is used for non-penetrating RubberGard EPDM membrane attachment, as specified in the Elevate guidelines.
Semi-cured EPDM strip laminated to QuickSeam tape. It is used to cover and seal batten strips which are installed over the membrane, as specified in the Elevate guidelines.
Uncured EPDM strip factory‐laminated to QuickSeam tape. It is designed to flash inside and outside corners, pipes, penetrations and other applications as specified in the Elevate guidelines.
Non-reinforced 1.5 mm thick RubberGard EPDM membrane, fully laminated to QuickSeam tape. It has a polyester release liner for easy removal and excellent weather resistance. It can be used to easily flash details where cured EPDM is required or preferred: curbs, parapets, gutters, general roof repairs, drain and pipe flanges.
Semi-cured EPDM strip laminated to QuickSeam tape. It is designed to flash metal roof edging profiles and other details, as specified in the Elevate guidelines.
Pre-fabricated pipe boot with a QuickSeam tape laminated to the bottom of its flange. Specifically designed for flashing rigid round penetrations of 25 mm to 152 mm.
Pre-fabricated pipe boot with a QuickSeam tape laminated to the bottom of its flange. Specifically designed for flashing rigid round penetrations and conduits of 13 mm to 64 mm.
Specifically designed to be used around small pipe penetrations, clusters of pipes, l-beams, etc.
High-quality rubber pads with QuickSeam tape factory-laminated to the bottom. They are used for protection of the RubberGard EPDM membrane in areas of regular roof traffic.
Discover our high-performance bonding adhesives designed for adhering the RubberGard EPDM roofing membrane to different substrates.
Solvent-based contact adhesive specifically designed for bonding RubberGard EPDM membranes to wood, metal, masonry, PIR insulation boards, Elevate ISOGARD™ HD cover boards and other acceptable substrates.
Designed to ensure that all RubberGard EPDM installation details are completely watertight.
Designed to seal and mechanically protect the exposed edges of QuickSeam products where required, as per Elevate guidelines. It can also be used as a general-purpose sealant in other applications, as specified in the Elevate guidelines.
Designed to provide a watertight seal when used in compression at drain and scupper details, wall terminations, and other details, as specified in the Elevate guidelines.
Two-component sealer designed to create a watertight seal around small pipe penetrations, clusters of pipes, I-beams etc. in a penetration pocket detail or in other applications, as specified in the Elevate guidelines.
The RubberGard EPDM membrane can be cleaned and coated using Elevate’s bespoke products.
Designed to clean and prepare contaminated RubberGard EPDM membranes in areas to receive adhesives where required by Elevate specifications and details.
Aesthetic coating that can be applied over all RubberGard EPDM membranes, whether new or existing.
All-Purpose and Heavy Duty Fasteners are specifically designed screws for mechanical attachment of the RubberGard EPDM membrane, roofing insulation or accessories such as batten bars, termination bars, etc. to steel, wood and concrete decks.
A quality RubberGard EPDM installation only requires a few simple but effective tools.
Specifically designed to be used in combination with Elevate’s All‐Purpose and Heavy‐Duty fasteners in roofing applications for attaching Elevate PIR insulation boards, Elevate ISOGARD HD cover boards or other approved insulation/cover boards.
Specifically designed to be used in combination with Elevate’s All‐Purpose and Heavy‐Duty fasteners to attach (reinforced) RubberGard EPDM membranes and QuickSeam RPF strip.
Pre-punched galvanized steel strips for anchoring EPDM membrane sheets.
Aluminium profile in C shape that is designed for attachment and termination of the RubberGard EPDM membrane against upstands with a smooth and even finishing surface such as concrete, steel, etc.
Used for the application of the QuickPrime Plus primer.
Used for the application of the QuickPrime Plus primer on upstands.
Used for rolling QuickSeam accessories.